J2022(Replacement For MAJ1817)4
Overview
Cermax Xenon Short ARC Lamps
| Type | J2022（Replacement For MAJ1817) |
| Catalogue Decription | 25.4mm Window Diameter |
| BT Part# | PE-J2022/Cermax J2022 |
| Country Of Origin | USA |
| Watts | 300W |
| Ends | Single Ended |
| Overall Length(mm/”) | 1.91” |
| Ozeone Free | Ozenon Free |
* These values indicate total output in all directions. Wavelengths = UV<390 nm, IR>770 nm, Visible: 390 nm-770 nm
* Beam Geometry defined as the half angle at 10% PTS after 0/100/1000 hour
* Nominal values at 300 watts after 2 hour burn-in.
NOTES:
1. Lamp must not be operated with window facing upwards within 45° of vertical.
2. Seal temperature must not exceed 150°.
3. Current/power regulated power supplies and Excelitas lamp housing units are recommended.
4. Lamp must be operated within recommended current and power range. Over powering may lead to arc instability, hard starting and premature aging.
5. Hot mirror assembly is available for IR filtering.
6. Cermax® Xenon lamps are much safer lamps to use than their quartz xenon arc lamp equivalents. However, caution must be practiced when operating lamps because they are under high pressure, require high voltage, reach temperatures up to 200℃, and their IR and UV radiation can cause skin burns and eye damage. Please read the Hazard Sheet included with each lamp shipment
